-------------------------------
Step 1. (Vsync off)
You need to turn Vsync off
Guide: Turning off vsync for nvidia & ATI
-------------------------------
Step 2. (netsetting)
The most important part is to tune up css for your internet connection speed.
If you have a lan or 100mbits conection, put those lines in your document text.
//100Mbits or lan
rate 20000
cl_rate 9999
cl_cmdrate 400.05
cl_updaterate 100.05
cl_cmdbackup 2
cl_resend 6
cl_dlmax 128
cl_latency 0
ex_interp 0.1
ex_extrapmax 1.2
-------------------------------
If you have a 56k modem connection, put those lines in your document text.
//56k modem
rate 4000
cl_rate 2000
cl_cmdrate 32
cl_updaterate 25
cl_cmdbackup 8
cl_resend 3
cl_dlmax 56
cl_latency -200
ex_interp 0.1
ex_extrapmax 1.2
-------------------------------
If you have a ISDN connection, put those lines in your document text.
//ISDN
rate 6500
cl_rate 6500
cl_cmdrate 50
cl_updaterate 33
cl_cmdbackup 20
cl_resend 3
cl_dlmax 64
cl_latency -30
ex_interp 0.1
ex_extrapmax 1.2
-------------------------------
If you have a D-ISDN connection, put those lines in your document text.
//D-ISDN
rate 9000
cl_rate 9999
cl_cmdrate 50
cl_updaterate 33
cl_cmdbackup 60
cl_resend 1.5
cl_dlmax 128
cl_latency -30
ex_interp 0.1
ex_extrapmax 1.2
-------------------------------
If you have a S-DSL connection, put those lines in your document text.
//S-DSL
rate 9000
cl_rate 9999
cl_cmdrate 50
cl_updaterate 33
cl_cmdbackup 60
cl_resend 1.5
cl_dlmax 128
cl_latency -30
ex_interp 0.1
ex_extrapmax 1.2
-------------------------------
If you have a A-DSL connection, put those lines in your document text.
//A-DSL
rate 12000
cl_rate 9999
cl_cmdrate 40
cl_updaterate 30
cl_cmdbackup 2
cl_resend 2
cl_dlmax 756
cl_latency -20
ex_interp 0.1
ex_extrapmax 1.2
-------------------------------
If you have a cable connection, put those lines in your document text.
//cable
rate 12000
cl_rate 9999
cl_cmdrate 40
cl_updaterate 30
cl_cmdbackup 2
cl_resend 2
cl_dlmax 756
cl_latency -20
ex_interp 0.1
ex_extrapmax 1.2
-------------------------------
If you have a Q-DSL connction, put those lines in your documen text.
//Q-DLS
rate 12000
cl_rate 9999
cl_cmdrate 400
cl_updaterate 35
cl_cmdbackup 60
cl_resend 2
cl_dlmax 512
cl_latency -40
ex_interp 0.1
ex_extrapmax 1.2
-------------------------------
If you have a DSL mit FP connection, put those lines in your document text.
//DSL mit FP
rate 12000
cl_rate 9999
cl_cmdrate 400
cl_updaterate 35
cl_cmdbackup 60
cl_resend 2
cl_dlmax 512
cl_latency -40
ex_interp 0.1
ex_extrapmax 1.2
Now your css will be adapted for your connection speed.
-------------------------------
Step 3. (100Fps+)
Let's have 100Fps. In the same document text, skip a line and put those lines:
//Fps
fps_max "100"
fps_modem "100"
net_graph "0"
cl_showfps "1"
developer "0"
If you want more than 100 fps just change the 100 for 200 or 300.. 100 fps is enough.
-------------------------------
Step 4. (Crosshair)
This part is important, add those lines in the same document.
//Crosshair
cl_dynamiccrosshair "0"
cl_crosshair_translucent "0"
alias "+forward" "adjust_crosshair;adjust_crosshair"
alias "+back" "adjust_crosshair;adjust_crosshair"
alias "+moveleft" "adjust_crosshair;adjust_crosshair"
alias "+moveright" "adjust_crosshair;adjust_crosshair"
Your crosshair size will not change while moving.
-------------------------------
Step 5. (color)
How to change your color (crosshair color and text color)
put that in the same document.
//Color
cl_crosshair_color "0 0 0"
con_color "0 0 0"
Change the 0 for a number between 0 and 255. 255 0 255 is pink, 255 255 255 is white... You can play with it.
-------------------------------
Step 6. (Play)
now you can play css with 100Fps.
-------------------------------
If you fps don't go to 100, your computer is not good enough or you connection sucks...
___________
Need help? Then post!
Step 1. (Vsync off)
You need to turn Vsync off
Guide: Turning off vsync for nvidia & ATI
-------------------------------
Step 2. (netsetting)
The most important part is to tune up css for your internet connection speed.
If you have a lan or 100mbits conection, put those lines in your document text.
//100Mbits or lan
rate 20000
cl_rate 9999
cl_cmdrate 400.05
cl_updaterate 100.05
cl_cmdbackup 2
cl_resend 6
cl_dlmax 128
cl_latency 0
ex_interp 0.1
ex_extrapmax 1.2
-------------------------------
If you have a 56k modem connection, put those lines in your document text.
//56k modem
rate 4000
cl_rate 2000
cl_cmdrate 32
cl_updaterate 25
cl_cmdbackup 8
cl_resend 3
cl_dlmax 56
cl_latency -200
ex_interp 0.1
ex_extrapmax 1.2
-------------------------------
If you have a ISDN connection, put those lines in your document text.
//ISDN
rate 6500
cl_rate 6500
cl_cmdrate 50
cl_updaterate 33
cl_cmdbackup 20
cl_resend 3
cl_dlmax 64
cl_latency -30
ex_interp 0.1
ex_extrapmax 1.2
-------------------------------
If you have a D-ISDN connection, put those lines in your document text.
//D-ISDN
rate 9000
cl_rate 9999
cl_cmdrate 50
cl_updaterate 33
cl_cmdbackup 60
cl_resend 1.5
cl_dlmax 128
cl_latency -30
ex_interp 0.1
ex_extrapmax 1.2
-------------------------------
If you have a S-DSL connection, put those lines in your document text.
//S-DSL
rate 9000
cl_rate 9999
cl_cmdrate 50
cl_updaterate 33
cl_cmdbackup 60
cl_resend 1.5
cl_dlmax 128
cl_latency -30
ex_interp 0.1
ex_extrapmax 1.2
-------------------------------
If you have a A-DSL connection, put those lines in your document text.
//A-DSL
rate 12000
cl_rate 9999
cl_cmdrate 40
cl_updaterate 30
cl_cmdbackup 2
cl_resend 2
cl_dlmax 756
cl_latency -20
ex_interp 0.1
ex_extrapmax 1.2
-------------------------------
If you have a cable connection, put those lines in your document text.
//cable
rate 12000
cl_rate 9999
cl_cmdrate 40
cl_updaterate 30
cl_cmdbackup 2
cl_resend 2
cl_dlmax 756
cl_latency -20
ex_interp 0.1
ex_extrapmax 1.2
-------------------------------
If you have a Q-DSL connction, put those lines in your documen text.
//Q-DLS
rate 12000
cl_rate 9999
cl_cmdrate 400
cl_updaterate 35
cl_cmdbackup 60
cl_resend 2
cl_dlmax 512
cl_latency -40
ex_interp 0.1
ex_extrapmax 1.2
-------------------------------
If you have a DSL mit FP connection, put those lines in your document text.
//DSL mit FP
rate 12000
cl_rate 9999
cl_cmdrate 400
cl_updaterate 35
cl_cmdbackup 60
cl_resend 2
cl_dlmax 512
cl_latency -40
ex_interp 0.1
ex_extrapmax 1.2
Now your css will be adapted for your connection speed.
-------------------------------
Step 3. (100Fps+)
Let's have 100Fps. In the same document text, skip a line and put those lines:
//Fps
fps_max "100"
fps_modem "100"
net_graph "0"
cl_showfps "1"
developer "0"
If you want more than 100 fps just change the 100 for 200 or 300.. 100 fps is enough.
-------------------------------
Step 4. (Crosshair)
This part is important, add those lines in the same document.
//Crosshair
cl_dynamiccrosshair "0"
cl_crosshair_translucent "0"
alias "+forward" "adjust_crosshair;adjust_crosshair"
alias "+back" "adjust_crosshair;adjust_crosshair"
alias "+moveleft" "adjust_crosshair;adjust_crosshair"
alias "+moveright" "adjust_crosshair;adjust_crosshair"
Your crosshair size will not change while moving.
-------------------------------
Step 5. (color)
How to change your color (crosshair color and text color)
put that in the same document.
//Color
cl_crosshair_color "0 0 0"
con_color "0 0 0"
Change the 0 for a number between 0 and 255. 255 0 255 is pink, 255 255 255 is white... You can play with it.
-------------------------------
Step 6. (Play)
now you can play css with 100Fps.
-------------------------------
If you fps don't go to 100, your computer is not good enough or you connection sucks...
___________
Need help? Then post!